Complete Ruckus Front Brake and Hub Kit

$700.00

SKU: CompleteFrontKit Categories: ,
Share Product

This kit is everything you need to put a custom wheel on your stock Ruckus.

Kits includes:

Front Hub

Right Disk Brake and Left Drum Brake Levers

Front Lowdown Forks

Rotor

Rotor Bolts

Brake Caliper

Brake Line

Branjo Bolts

12 mm Axle

 

*Does not include spacers for the front wheel or the master cylinder. This is something you make once you have everything together.

  1. How do I install my front wheel? How do I figure out what size spacers I need?
    1. Every bike setup is slightly different so you have to make your own spacers for the front wheel.
    2. First, center your front wheel using M12 spacers. Do not over tighten the axle nuts. The wheel should still spin freely once you tighten everything down. If it doesnt spin then you have a problem. Either add or take off a washer on the non brake side until you can tighten the nut and have the wheel spin. Don’t forget not to over tighten the axle nut.
    3. Once your wheel is centered, center the brake over the rotor using M8 washers. Center the brake the best you can from the top view. Spin the wheel and make sure your rotor isnt dragging on one side or the other. You will hear it rub the brake pads a little but just make sure looking from the top when you spin the wheel that it looks centered in the gap of the brake.
    4. Now that everything is centered, measure the washers to figure out what size spacers to buy
    5. DO NOT USE RIDE WITH THE WASHERS. The washers will mess up your bearings if you ride on them. You need spacers.
    6. Best way to measure the washers is with a cheap caliper from Harbor Freight, https://www.harborfreight.com/6-in-composite-digital-caliper-63586.html

 

 

Weight 5 lbs
Dimensions 12 × 12 × 6 in
Color

Black, Silver